ارسال رایگان
Gol Pumps 2″ Thin Submersible Pump – 123 Ft – 312GPH – 3 Wire – 1/4HP
$401.99
This 2″ thin submersible pump from GOL Pumps can be used for water supply in wells and reservoirs. It can reach a up to 123 feet of head and is great for 2.5″ diameter wells.
- Water supply from well and reservoirs
- Comes auto control box
- Rewindable motor
Applications
- For water supply from wells or reservoirs
- For domestic use
- For civil and industrial applications
- For garden use and irrigation
Operating conditions
- Maximum fluid temperature up to +35
- Maximum sand content : 0.25%
- Minimum well diameter : 2″
Motor and Pump
- Rewindable motor
- Single-phase:110V/60Hz or 220V/60Hz
- Equip with start control box
- Pumps are designed by casing stressed Curve tolerance according to ISO 9906
| Voltage |
110/115 volt ,220/230 volt |
|---|---|
| Brand |
GPT CO |
Description
Description
Technical Specifications
| Pump Type | Thin Submersible Pump |
| Pump Brand | GOL Pumps |
| Pump Model | 2SDM0.7/19 |
| Warranty | 1 Year |
| Maximum Head | 123ft |
| Minimum Head | 30ft |
| Maximum Flow | 312 GPH |
| Minimum Fluid Temperature | 50°F |
| Maximum Fluid Temperature | 95°F |
| Maximum Ambient Temperature | 104°F |
| Discharge | 3/4″ NPT |
| Pump Material | Stainless Steel 304 |
| Pump Diameter | 2″ |
G 2″/2.5″ SD
Performance Data
| MODEL | P2 | DELIVERY N = 3450 1/min | |||||||||
| 1~
110V/220V |
KW | HP | Q | m3/h | 0 | 0.2 | 0.4 | 0.6 | 0.8 | 1.0 | 1.2 |
| l/min | 0 | 3.3 | 6.6 | 10 | 13.3 | 16.6 | 20 | ||||
| G 2SDM0.7/19 | 0.18 | 0.25 | H (m) | 37 | 32 | 30 | 27 | 23 | 16 | 9 | |
Dimension and Weight
| MODEL | DN | DIMENSION(inch) | WEIGHT(lbs) | PUMP | |||||
| 1~
110V/220V |
P | M | T | P | M | T | D1 | D2 | |
| G 2SDM0.7/19 | 1/2″ | 3/4″ | 24.4 | 20 | 44 | 4 | 9.5 | 13.1 | 51 | 50 |
| Components | Material |
| Pump external casing | AISI 304 SS |
| Delivery casing | Cast-Cu ASTM C85500 |
| Suction lantern | Cast-Cu ASTM C85500 |
| Diffuser | Plastic.PC |
| Impeller | Plastic.POM |
| Shaft | AISI 304 SS |
| Shaft coupling | AISI 304 SS |
| Wear ring | AISI 304 SS |
| Motor external casing | AISI 304 SS |
| Top cover | Cast-Cu ASTM C85500 Cast-iron ASTM NO.30 |
| Bottom support | AISI 304 SS |
| Mechanical seal | Special seal for deep well(Graphite-Ceramic/TC) |
| Shaft | AISI 303 SS-ASTM 1045/5140 |
| Seal lubricant oil | Oil for food machinery and pharmaceutic use. |
Reviews (0)
Shipping & Delivery
Estimated Delivery: 3-5 Business Days
*If the item is over 100 lbs, forklift is required at commercial delivery location only, otherwise we will charge $100 Liftgate service fee . For residential addresses additional delivery fees may apply.
Reviews
There are no reviews yet.